SD2000 - efector300-SDR21DGXFPKG/US-100

Brand: IFM Electronic

Code: SD2000

Precise measurement of flow, consumption and medium temperature
High accuracy, repeatability and measurement dynamics
For detecting compressed air in industrial use
With switching output, analogue output and pulse output
Clearly visible 4-digit LED display

Product characteristics

Number of inputs and outputs

Number of digital outputs: 2; Number of analogue outputs: 1

Measuring range

0.3...95.2 m/s

3...700 m³/h

0.04...11.66 m³/min

Process connection

threaded connection R 2 DN50

Application

for industrial applications

Media

compressed air

Note on media

air quality ISO 8573-1

class 141

class 344

Medium temperature [°C]

0...60

Pressure rating [bar]

Pressure rating [Mpa]

1.6

Electrical data

Operating voltage [V]	18...30 DC; (to SELV/PELV)
Current consumption [mA]	< 110
Protection class	III
Reverse polarity protection	yes
Power-on delay time [s]	1

Inputs / outputs

Number of inputs and outputs	Number of digital outputs: 2; Number of analogue outputs: 1

Outputs

Total number of outputs	2
Output signal	switching signal; analogue signal; pulse signal; IO-Link; (configurable)
Electrical design	PNP
Number of digital outputs	2
Output function	normally open / normally closed; (parameterisable)
Max. voltage drop switching output DC [V]	2
Permanent current rating of switching output DC [mA]	250; (per output)
Number of analogue outputs	1
Analogue current output [mA]	4...20; (scalable)
Max. load [Ω]	500
Pulse output	consumed quantity meter
Short-circuit protection	yes
Type of short-circuit protection	pulsed
Overload protection	yes

Measuring/setting range

Measuring range

0.3...95.2 m/s

3...700 m³/h

0.04...11.66 m³/min

Display range

0...114.2 m/s

0...840 m³/h

0...13.99 m³/min

Set point SP

0.7...95.2 m/s

5...700 m³/h

0.09...11.66 m³/min

Reset point rP

0.3...94.8 m/s

2...697 m³/h

0.04...11.61 m³/min

Analogue start point ASP

0...71.4 m/s

0...525 m³/h

0...8.75 m³/min

Analogue end point AEP

23.8...95.2 m/s

175...700 m³/h

2.91...11.66 m³/min

In steps of

0.1 m/s

1 m³/h

0.01 m³/min

Volumetric flow quantity monitoring

Pulse value	0.010...4000000 m³
In steps of	0.010 m³
Pulse length [s]	0,021...2

Temperature monitoring

Measuring range [°C]	0...60
Display range [°C]	-12...72

Accuracy / deviations

Flow monitoring

Repeatability [% of the measured value]	± 1,5
Accuracy (in the measuring range)	± (3 % MW + 0,3 % MEW) / ± (6 % MW + 0,6 % MEW); (class 141 /; class 344; conditions: installation to DIN ISO 2533; installation in pipes: DN50)

Temperature monitoring

Accuracy [K]	± 2; (medium flow in the limit area of the flow measurement range)

Response times

Flow monitoring

Response time [s]	0.1; (dAP = 0)
Damping process value dAP in steps [s]	0 - 0,2 - 0,4 - 0,6 - 0,8 - 1

Software / programming

Parameter setting options	Flow monitoring; quantity meter; Preset counter; Temperature monitoring; hysteresis / window; normally open / normally closed; current/pulse output; display can be rotated and switched off; Display unit; totaliser

Interfaces

Communication interface

IO-Link

Transmission type

COM2 (38,4 kBaud)

IO-Link revision

1.1

SDCI standard

IEC 61131-9 CDV

Profiles

no profile

SIO mode

yes

Required master port type

Process data analogue

Process data binary

Min. process cycle time [ms]

4.1

Supported DeviceIDs

Type of operation	DeviceID
Default	270

Operating conditions

Ambient temperature [°C]	0...60
Storage temperature [°C]	-20...85
Max. relative air humidity [%]	90
Protection	IP 65

Tests / approvals

EMC

DIN EN 61000-6-2
DIN EN 61000-6-3

CPA approval

model number	002TG
accuracy class	-
maximum allowable error	± 4 % FS
Q (min)	3 m³/h
Q (t)	-
Q (max)	700 m³/h

Vibration resistance

DIN EN 68000-2-6

5 g (55...2000 Hz)

MTTF [years]

227

Pressure Equipment Directive

Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request

Mechanical data

Weight [g]	4313
Materials	PBT-GF20; NBR; PC; stainless steel (1.4301 / 304); PTFE; brass coated; FKM; aluminium powder-coated
Materials (wetted parts)	stainless steel (1.4301 / 304): ; FKM; ceramics: glass passivated; PEEK GF30; polyester; aluminium
Process connection	threaded connection R 2 DN50

Displays / operating elements

Display

Display unit	5 x LED, green (Nm³/min, Nm³/h, Nm/s, Nm³, °C)
function display	1 x LED, green
switching status	2 x LED, yellow
measured values	alphanumeric display, 4-digit
programming	alphanumeric display, 4-digit

Remarks

MW = measured value

MEW = Final value of the measuring range

Measuring, display and setting ranges refer to the standard volume flow according to DIN ISO 2533.

For information about installation and operation please see the operating instructions.

Pack quantity

1 pcs.

Electrical connection

Connection	Connector: 1 x M12; coding: A

ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — SD2000-02 — 13.04.2023 —