SD5100 - efector300-SDR14DGXFPKG/US-100
Brand: IFM Electronic
Code: SD5100
- Precise measurement of flow, consumption and medium temperature
- High accuracy, repeatability and measurement dynamics
- For detecting compressed air in industrial use
- With switching output, analogue output and pulse output
- Clearly visible 4-digit LED display
Product characteristics
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 |
|---|---|
| Process connection | threaded connection G 1/4 DN8 |
| Measuring range [m³/h] | 0.08...24.04 |
|---|
| Measuring range [m³/h] | 0.04...14.36 |
|---|
| Measuring range [m³/h] | 0.04...15 |
|---|
Application
| Application | for industrial applications |
|---|---|
| Media | Argon (Ar); carbon dioxide (CO2); nitrogen (N2) |
| Medium temperature [°C] | 0...60 |
| Pressure rating [bar] | 16 |
| Pressure rating [Mpa] | 1.6 |
Electrical data
| Operating voltage [V] | 18...30 DC; (to SELV/PELV) |
|---|---|
| Current consumption [mA] | < 100 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time [s] | 1 |
Inputs / outputs
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 |
|---|
Outputs
| Total number of outputs | 2 |
|---|---|
| Output signal | switching signal; analogue signal; pulse signal; IO-Link; (configurable) |
| Electrical design | PNP |
| Number of digital outputs | 2 |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC [V] | 2 |
| Permanent current rating of switching output DC [mA] | 250; (per output) |
| Number of analogue outputs | 1 |
| Analogue current output [mA] | 4...20; (scalable) |
| Max. load [Ω] | 500 |
| Pulse output | consumed quantity meter |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
Measuring/setting range
| Low flow cut-off LFC [m³/h] | < 0.26 |
|---|---|
| Measuring dynamics | 1:300 |
| Measuring range [m³/h] | 0.08...24.04 |
|---|---|
| Display range [m³/h] | 0...28.84 |
| Resolution [m³/h] | 0.02 |
| Set point SP [m³/h] | 0.22...24.04 |
| Reset point rP [m³/h] | 0.12...23.94 |
| Analogue start point ASP [m³/h] | 0...19.24 |
| Analogue end point AEP [m³/h] | 4.8...24.04 |
| In steps of [m³/h] | 0.02 |
| Measuring range [m³/h] | 0.04...14.36 |
|---|---|
| Display range [m³/h] | 0...17.24 |
| Resolution [m³/h] | 0.02 |
| Set point SP [m³/h] | 0.14...14.36 |
| Reset point rP [m³/h] | 0.08...14.3 |
| Analogue start point ASP [m³/h] | 0...11.48 |
| Analogue end point AEP [m³/h] | 2.88...14.36 |
| In steps of [m³/h] | 0.02 |
| Pulse value | 0.001...1 000 000 m³ |
|---|---|
| In steps of | 0.001...1000 m³ |
| Pulse length [s] | 0,062...2 |
| Measuring range [m³/h] | 0.04...15 |
|---|---|
| Display range [m³/h] | 0...18 |
| Resolution [m³/h] | 0.02 |
| Set point SP [m³/h] | 0.14...15 |
| Reset point rP [m³/h] | 0.08...14.94 |
| Analogue start point ASP [m³/h] | 0...12 |
| Analogue end point AEP [m³/h] | 3...15 |
| In steps of [m³/h] | 0.02 |
| Measuring range [°C] | 0...60 |
|---|---|
| Display range [°C] | -12...72 |
| Resolution [°C] | 0.2 |
| Set point SP [°C] | 0.4...60 |
| Reset point rP [°C] | 0...59.8 |
| Analogue start point [°C] | 0...48 |
| Analogue end point [°C] | 12...60 |
| In steps of [°C] | 0.2 |
Accuracy / deviations
| Repeatability [% of the measured value] | ± 1,5 |
|---|---|
| Accuracy (in the measuring range) | ± (6 % MW + 0,6 % MEW); (conditions: installation to DIN ISO 2533) |
| Accuracy [K] | ± 2; (medium flow in the limit area of the flow measurement range) |
|---|
Response times
| Response time [s] | 0.1; (dAP = 0) |
|---|---|
| Damping process value dAP in steps [s] | 0 - 0,2 - 0,4 - 0,6 - 0,8 - 1 |
Software / programming
| Parameter setting options | Flow monitoring; quantity meter; Preset counter; hysteresis / window; normally open / normally closed; current/pulse output; display can be rotated and switched off; Display unit; medium selection |
|---|
Interfaces
| Communication interface | IO-Link | ||||
|---|---|---|---|---|---|
| Transmission type | COM2 (38,4 kBaud) | ||||
| IO-Link revision | 1.1 | ||||
| SDCI standard | IEC 61131-9 | ||||
| Profiles | Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis | ||||
| SIO mode | yes | ||||
| Required master port type | A | ||||
| Process data analogue | 3 | ||||
| Process data binary | 2 | ||||
| Min. process cycle time [ms] | 4.1 | ||||
| Supported DeviceIDs |
|
Operating conditions
| Ambient temperature [°C] | 0...60 |
|---|---|
| Storage temperature [°C] | -20...85 |
| Max. relative air humidity [%] | 90 |
| Protection | IP 65 |
Tests / approvals
| EMC |
| ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CPA approval |
| ||||||||||||||||||||
| Vibration resistance |
| ||||||||||||||||||||
| MTTF [years] | 227 | ||||||||||||||||||||
| Pressure Equipment Directive | Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
Mechanical data
| Weight [g] | 981 |
|---|---|
| Materials | PBT-GF20; PC; PC; stainless steel (1.4301 / 304); FKM |
| Materials (wetted parts) | stainless steel (1.4301 / 304); ceramics glass passivated; PEEK; polyester; FKM; aluminium anodised |
| Process connection | threaded connection G 1/4 DN8 |
Displays / operating elements
| Display |
| ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Display unit | Nl/min; Nm³/h; Nm³; °C |
Remarks
| Remarks |
| ||||
|---|---|---|---|---|---|
| Pack quantity | 1 pcs. |
Electrical connection
| Connection | Connector: 1 x M12; coding: A |
|---|
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — SD5100-02 — 13.04.2023 — 
Check out any spare parts and components from the IFM Electronic catalog!
Do you want to order a SD5100 - efector300-SDR14DGXFPKG/US-100 with code: SD5100?
Leave your request on our website for immediate assistance!
