SD6800 industrial gas counter SDR12DGXFRKG/US-100

Code: SD6800

Precise measurement of flow, consumption, pressure and medium temperature
High accuracy, repeatability and measurement dynamics
For the detection of helium
Red/green display for clear identification of the acceptable range
Display can be rotated for optimum alignment

Product characteristics

Number of inputs and outputs	Number of digital outputs: 2; Number of analogue outputs: 1
Process connection	threaded connection R 1/2 DN15

Pressure monitoring

Measuring range [bar]	-1...16

Application

Application	for industrial applications
Media	helium
Medium temperature [°C]	-10...60
Min. bursting pressure [bar]	64
Pressure rating [bar]	16
Pressure rating [Mpa]	1.6
MAWP (for applications according to CRN) [bar]	9.7

Electrical data

Operating voltage [V]	18...30 DC; (to SELV/PELV)
Current consumption [mA]	< 80
Protection class	III
Reverse polarity protection	yes
Power-on delay time [s]	1

Inputs / outputs

Number of inputs and outputs	Number of digital outputs: 2; Number of analogue outputs: 1

Inputs

Inputs	counter reset

Outputs

Output signal	switching signal; analogue signal; pulse signal; IO-Link; (configurable)
Electrical design	PNP/NPN
Number of digital outputs	2
Output function	normally open / normally closed; (parameterisable)
Max. voltage drop switching output DC [V]	2.5
Permanent current rating of switching output DC [mA]	150; (per output)
Number of analogue outputs	1
Analogue current output [mA]	4...20; (scalable)
Max. load [Ω]	500
Pulse output	consumed quantity meter
Short-circuit protection	yes
Type of short-circuit protection	pulsed
Overload protection	yes

Measuring/setting range

Measuring range

1.5...166.5 l/min

0.1...13.3 m/s

0.1...10 m³/h

Display range

1.5...200 l/min

0.1...16 m/s

0.1...12 m³/h

Resolution

1 l/min

0.1 m/s

0.05 m³/h

Set point SP

2.7...166.7 l/min

0.2...13.3 m/s

0.16...10 m³/h

Reset point rP

1.8...165.8 l/min

0.1...13.2 m/s

0.11...9.95 m³/h

Analogue start point ASP

0...133.3 l/min

0...10.6 m/s

0...8 m³/h

Analogue end point AEP

33.4...166.7 l/min

2.7...13.3 m/s

2...10 m³/h

Low flow cut-off LFC

1.3...1.7 l/min

0.1 m/s

0.08...0.1 m³/h

In steps of

1 l/min

0.1 m/s

0.01 m³/h

Pressure monitoring

Measuring range [bar]	-1...16
Display range [bar]	-1...20
Resolution [bar]	0.05
Set point SP [bar]	-0.92...16
Reset point rP [bar]	-1...15.92
Analogue start point [bar]	-1...12.8
Analogue end point [bar]	2.2...16
In steps of [bar]	0.01

Volumetric flow quantity monitoring

Measuring range

0...100000000 m³

0...353146667.2 scf

Display range

0...100000000 m³

0...353146667.2 scf

Set point SP

0.001...10000000 m³

0.05...353146667.2 scf

Pulse value

0.001...10000000 m³

0.05...353146667.2 scf

In steps of

0.0001 m³

0.005 scf

Pulse length [s]

0.002...2

Temperature monitoring

Measuring range

-10...60 °C

14...140 °F

Display range

-24...74 °C

-11.2...165.2 °F

Resolution

0.2 °C

0.5 °F

Set point SP

-9.7...60 °C

14.6...140 °F

Reset point rP

-10...59.7 °C

14...139.4 °F

Analogue start point

-10...46 °C

14...114.8 °F

Analogue end point

4...60 °C

39.2...140 °F

In steps of

0.1 °C

0.1 °F

Accuracy / deviations

Temperature coefficient [1/K]	± 0,07 % MW
Accuracy (in the measuring range)	± (6 % MW + 0,6 % MEW); at medium temperature 23 °C
Repeatability	0,8 % MW + 0,2 % MEW

Pressure monitoring

Repeatability [% of the final value]	± 0,2
Characteristics deviation [% of the final value]	< ± 0,5; (BFSL = Best Fit Straight Line)
Greatest TEMPCO of the span [% MEW / 10 K]	± 0,15
Greatest TEMPCO of the zero point [% MEW / 10 K]	± 0,25

Temperature monitoring

Accuracy [K]	± 0,5; (medium flow in the limit area of the flow measurement range)

Response times

Response time [s]	0.1; (dAP = 0)
Damping process value dAP [s]	0...5

Pressure monitoring

Response time [s]	0.05

Temperature monitoring

Dynamic response T05 / T09 [s]	T09 = 0,5

Software / programming

Parameter setting options	hysteresis / window; normally open / normally closed; current/pulse output; display can be rotated and switched off; Display unit; totaliser

Interfaces

Communication interface

IO-Link

Transmission type

COM2 (38,4 kBaud)

IO-Link revision

1.1

SDCI standard

IEC 61131-9 CDV

Profiles

Digital Measuring Sensor (0x800A), Identification and Diagnosis (0x4000)

SIO mode

yes

Required master port type

Process data analogue

Process data binary

Min. process cycle time [ms]

7.2

Supported DeviceIDs

Type of operation	DeviceID
Default	1302

Operating conditions

Ambient temperature [°C]	0...60
Storage temperature [°C]	-20...85
Max. relative air humidity [%]	90
Protection	IP 65; IP 67

Tests / approvals

EMC

DIN EN 60947-5-9

CPA approval

model number	003TG
accuracy class	-
maximum allowable error	± 7 % FS
Q (min)	0,1 m³/h (He)
Q (t)	-
Q (max)	10 m³/h (He)

Vibration resistance

DIN EN 68000-2-6

5 g (10...2000 Hz)

MTTF [years]

180

UL approval

UL Approval no.	I012
File number UL	E174189

Pressure Equipment Directive

Sound engineering practice; can be used for stable gases fluid group 2

Mechanical data

Weight [g]	715.7
Materials	PBT+PC-GF30; PPS GF40; stainless steel (1.4301 / 304); stainless steel (1.4305 / 303); steel (1.5523) galvanised; 2.0401 (brass / CW614N); FKM
Materials (wetted parts)	stainless steel (1.4301 / 304); stainless steel (1.4305 / 303); FKM; ceramics glass passivated; PPS GF40; Al2O3 (ceramics); acrylate
Process connection	threaded connection R 1/2 DN15

Displays / operating elements

Display

	colour display 1,44", 128 x 128 pixels
	2 x LED, yellow

Remarks

MW = measured value

MEW = Final value of the measuring range

Standard conditions: 1013.25 mbar / 15 °C / 0 % relative humidity

For information about installation and operation please see the operating instructions.

Pack quantity

1 pcs.

Electrical connection

Connection	Connector: 1 x M12; coding: A

ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — SD6800-00 — 20.12.2021 —