SDG207 - efector300-SDG8″/METRIS PB DN200 SS LM

Code: SDG207

Precise measurement of flow and consumption
High accuracy, repeatability and measurement dynamics
For detecting compressed air in industrial use
With switching output, analogue output and pulse output
Clearly visible 4-digit LED display

Product characteristics

Number of inputs and outputs	Number of digital outputs: 2; Number of analogue outputs: 1
Measuring range [m³/h]	58...17500
Process connection	flange DN200 according to:DIN 2448

Application

totaliser function

Media

compressed air

Note on media

air quality ISO 8573-1

class 141

class 344

Medium temperature [°C]

0...60

Pressure rating [bar]

Pressure rating [Mpa]

1.6

Electrical data

Operating voltage [V]	19...30 DC
Current consumption [mA]	< 100
Protection class	III
Reverse polarity protection	yes
Power-on delay time [s]	0.5

Inputs / outputs

Number of inputs and outputs	Number of digital outputs: 2; Number of analogue outputs: 1

Outputs

Total number of outputs	2
Output signal	switching signal; analogue signal; pulse signal; (configurable)
Electrical design	PNP
Number of digital outputs	2
Output function	normally open / normally closed; (parameterisable)
Max. voltage drop switching output DC [V]	2
Permanent current rating of switching output DC [mA]	250; (per output)
Number of analogue outputs	1
Analogue current output [mA]	4...20; (scalable)
Max. load [Ω]	500
Pulse output	consumed quantity meter
Short-circuit protection	yes
Type of short-circuit protection	pulsed
Overload protection	yes

Measuring/setting range

Measuring range [m³/h]	58...17500
Display range [m³/h]	0...21000

Volumetric flow quantity monitoring

Pulse value	10 Nm³
Pulse length [s]	0,1

Accuracy / deviations

Flow monitoring

Accuracy (in the measuring range)	± (3 % MW + 0,3 % MEW) / ± (6 % MW + 0,6 % MEW); (class 141 /; class 344)

Response times

Flow monitoring

Response time [s]	0.1; (dAP = 0)

Operating conditions

Ambient temperature [°C]	0...60
Storage temperature [°C]	-20...85
Max. relative air humidity [%]	90
Protection	IP 65

Tests / approvals

EMC

EN 61000-4-2 ESD	4 kV CD / 8 kV AD
EN 61000-4-3 HF radiated	10 V/m
EN 61000-4-4 Burst	2 kV
EN 61000-4-6 HF conducted	10 V

Vibration resistance

DIN IEC 68-2-6

5 g (55...2000 Hz)

MTTF [years]

214

Mechanical data

Weight [g]	41441
Materials	PBT-GF20; PC; PC; stainless steel (1.4301 / 304); FKM; pipe section: stainless steel (1.4301 / 304)
Materials (wetted parts)	stainless steel (316 / 1.4401); stainless steel (1.4301 / 304); ceramics glass passivated; PEEK; polyester; FKM; aluminium anodised; stainless steel (1.4301 / 304)
Process connection	flange DN200 according to:DIN 2448

Remarks

MW = measured value

MEW = Final value of the measuring range

Measuring, display and setting ranges refer to the standard volume flow according to DIN ISO 2533.

For information about installation and operation please see the operating instructions.

Pack quantity

1 pcs.

Electrical connection

Connection	Connector: 1 x M12; coding: A

ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — SDG207-00 — 04.02.2010 —