TW2011 - efector600-TW-150KLBM30-KFDKG/US

Brand: IFM Electronic

Code: TW2011

Reliable, non-contact temperature measurement of objects with very high temperatures
For applications in the steel and glass industries
Intuitive setting of analogue output and switching output via pushbutton
Clearly visible display for showing the current temperature
Robust housing and scratch-resistant precision lens for use in harsh industrial environments

Product characteristics

Number of inputs and outputs

Number of digital outputs: 1; Number of analogue outputs: 1

Measuring range

300...1600 °C

572...2912 °F

Application

Application	tempering temperatures; glass melting; graphite; ceramics; metals; forging; sintering; heat treatment; rolling

Electrical data

Operating voltage [V]	18...32 DC; (to SELV/PELV)
Current consumption [mA]	< 50
Min. insulation resistance [MΩ]	100; (50 V DC)
Protection class	III
Reverse polarity protection	yes
Power-on delay time [s]	< 1

Inputs / outputs

Number of inputs and outputs	Number of digital outputs: 1; Number of analogue outputs: 1

Inputs

Test input	type 3 (IEC 61131-2)

Outputs

Total number of outputs	2
Output signal	switching signal; analogue signal; IO-Link; (configurable)
Electrical design	PNP
Number of digital outputs	1
Output function	normally open / normally closed; (parameterisable)
Max. voltage drop switching output DC [V]	2.5
Permanent current rating of switching output DC [mA]	150
Number of analogue outputs	1
Analogue current output [mA]	4...20
Max. load [Ω]	500
Short-circuit protection	yes
Type of short-circuit protection	pulsed
Short-circuit proof	yes
Overload protection	yes

Detection zone

Wave length range [µm]	1...1.7

Measuring/setting range

Measuring range

300...1600 °C

572...2912 °F

Set point SP

301...1600 °C

574...2912 °F

Reset point rP

300...1599 °C

572...2910 °F

Analogue start point

300...1400 °C

572...2552 °F

Analogue end point

500...1600 °C

932...2912 °F

In steps of

1 °C

1 °F

Resolution

Resolution of switching output [K]	1
Resolution of analogue output [K]	0.2; (+ 0.03% of the set measuring span)
Resolution of display [K]	1

Accuracy / deviations

Accuracy [K]	< ± 0,5 %; (of measured value, min. 4 K (degree of emission = 1, T = 23 °C))
Repeatability [K]	1

Response times

Response time [ms]	2; (T > 600 °C)

Software / programming

Adjustment of the switch point	programming buttons
Parameter setting options	analogue range; normally open / normally closed; switch-on/switch-off delay; Damping; Peakhold; emissivity; simulation function

Interfaces

Communication interface

IO-Link

Transmission type

COM2 (38,4 kBaud)

IO-Link revision

1.1

SDCI standard

IEC 61131-9

SIO mode

yes

Required master port type

Process data analogue

Process data binary

Min. process cycle time [ms]

3.6

Supported DeviceIDs

Type of operation	DeviceID
Default	719

Operating conditions

Ambient temperature [°C]

0...65

Note on ambient temperature

fibre optics and measuring head: -20...250 °C

Storage temperature [°C]

-20...80

Max. relative air humidity [%]

95; (non condensing)

Protection

IP 65

Tests / approvals

EMC

DIN EN 61000-6-2
DIN EN 61000-6-4

Shock resistance

DIN EN 60068-2-27

30 g (11 ms)

Vibration resistance

DIN EN 60068-2-6

5 g (10...2000 Hz)

MTTF [years]

Mechanical data

Weight [g]

899.5

Housing

threaded type

Dimensions [mm]

M30 x 1.5

Thread designation

M30 x 1.5

Fibre optic connection

¼"-36UNS-2A

Materials

threaded sleeve: stainless steel (1.4305 / 303); polyester

Lens material

tempered optical glass

Displays / operating elements

Display

Display unit	2 x LED, yellow
switching status	1 x LED, yellow
function display	7-segment LED display, 4-digit
measured values	7-segment LED display, 4-digit

Operating elements

3	pushbuttons

Accessories

Items supplied

lock nuts: 2

fibre optic: 2 m

Measuring head

Remarks

Use a screened cable to protect infrared temperature sensors from interference.

The screen must be connected to the housing of the sensor via the connector.

On delivery the sensor is premounted and calibrated and is supplied with 2 m fibre optic.

If the fibre optic is replaced the sensor has to be recalibrated (ZC0062).

Pack quantity

1 pcs.

Electrical connection

Connection	Connector: 1 x M12

Diagrams and graphs

1	diameter of the measured spot
2	measuring distance

ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — TW2011-01 — 13.04.2023 —