Active infrared scanner DoorScan-OS-1P-1200
Brand: Pepperl+Fuchs
Code: DoorScan-OS-1P-1200
Moving presence sensor for automatic doors, SIL 2, certified in accordance with DIN 18650/EN 16005, Exceptional detection reliability, Reliable operation with all floor coverings, Complete protection up to the wall without sensor shutoff, Function: Open and secure, Sensor principle: Active infrared scanner
Datasheet excerpt: Technical data of DoorScan-OS-1P-1200
| Product Description |
|---|
| Light curtain for individual protection for automatic doors in accordance with DIN 18650/EN 16005, complete system for a door measuring up to 1200 mm wide, NPN output |
| General specifications | ||
|---|---|---|
| Detection range min. | 0 ... 1500 mm | |
| Detection range max. | 0 ... 3500 mm (Upright CA test body) | |
| Sensing range | 1000 mm at installation height of 2100 mm | |
| Light source | IRED 850 nm | |
| Black-white difference (6 %/90 %) | < 2 % at 2000 mm sensor range | |
| Number of beams | 10 | |
| Operating mode | Background evaluation | |
| Diameter of the light spot | 8 cm at 2000 mm sensor range | |
| Functional safety related parameters | ||
| Safety Integrity Level (SIL) | SIL 2 | |
| Performance level (PL) | PL d | |
| Category | Cat. 2 | |
| MTTFd | 112.7 a | |
| Mission Time (TM) | 10 a | |
| Indicators/operating means | ||
| Function indicator | Receiver: Red LED: detection, excess gain, fault code Interface: Red LED: detection, excess gain, fault code Yellow LED: teach status Green LED: blank status Green LED: DIP switch status | |
| Control elements | Teach-In key , DIP switch for selection of operating modes | |
| Electrical specifications | ||
| Operating voltage | 24 V DC +/- 20 % | |
| No-load supply current | max. 200 mA | |
| Power consumption | 3.3 W | |
| Input | ||
| Test input | high level ≥ 15 V low level ≤ 2 V | |
| Control input | Standby active at U = 11 V DC at 30 V DC | |
| Output | ||
| Switching type | light-on | |
| Signal output | switchable NPN or PNP , short-circuit protected | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 100 mA | |
| Response time | ≤ 52 ms ≤ 200 ms in boost operating mode | |
| Conformity | ||
| Functional safety | ISO 13849-1 ; EN 61508 part1-4 | |
| Product standard | EN 12978 | |
| Approvals and certificates | ||
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -30 ... 60 °C (-22 ... 140 °F) | |
| Mechanical specifications | ||
| Housing length L | 1200 mm | |
| Mounting height | max. 3500 mm | |
| Degree of protection | IP54 (when mounted) | |
| Connection | Plug-in terminal with 6-wire connection cable | |
| Material | ||
| Housing | Aluminum / PA | |
| Optical face | PC (Polycarbonate) | |
| Mass | approx. 1400 g | |
| Dimensions | (W x H x D) : 42 mm x 1200 mm x 37 mm | |
| General information | ||
| Scope of delivery | Sensor system for door hinge side or hinge opposite side (1 emitter and receiver module each, 1 interface module, double-ended cordset, 1 sensing strip each, and sensor window, 2 end caps) | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270913 |
| ECLASS 12.0 | 27270913 |
| ECLASS 11.0 | 27270913 |
| ECLASS 10.0.1 | 27270913 |
| ECLASS 9.0 | 27270913 |
| ECLASS 8.0 | 27270913 |
| ECLASS 5.1 | 27270903 |
| ETIM 9.0 | EC002550 |
| ETIM 8.0 | EC002550 |
| ETIM 7.0 | EC002550 |
| ETIM 6.0 | EC002550 |
| ETIM 5.0 | EC001821 |
| UNSPSC 12.1 | 39121528 |
Check out any spare parts and components from the Pepperl+Fuchs catalog!
Do you want to order a Active infrared scanner DoorScan-OS-1P-1200 with code: DoorScan-OS-1P-1200?
Leave your request on our website for immediate assistance!
