Background suppression sensor MLV41-8-HV-60-IR-5360
Brand: Pepperl+Fuchs
Code: MLV41-8-HV-60-IR-5360
Background suppression sensor, Special device for paper web break control and printing machinery, Sensing range 20 mm ... 60 mm, Light scanner with foreground suppression 0 mm ... 15 mm and background suppression beyond 70 mm, Minimal black-white difference, Sturdy aluminum housing
Datasheet excerpt: Technical data of MLV41-8-HV-60-IR-5360
| Product Description |
|---|
| Background suppression sensor |
| General specifications | ||
|---|---|---|
| Foreground suppression | 0 ... 15 mm | |
| Detection range | on black (6 %): 20 ... 60 mm fixed | |
| Detection range min. | 20 ... 60 mm | |
| Detection range max. | 16 ... 70 mm | |
| Background suppression | starts from 70 mm | |
| Light source | IRED | |
| Light type | modulated infrared light , 880 nm | |
| Polarization filter | no | |
| Black-white difference (6 %/90 %) | < 1 % at 60 mm | |
| Diameter of the light spot | max. 6 mm at a distance of 70 mm | |
| Opening angle | approx. 4 ° | |
| Ambient light limit | 50000 Lux | |
| Functional safety related parameters | ||
| MTTFd | 1260 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Operation indicator | LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz) | |
| Function indicator | 2 LEDs yellow ON: object inside the scanning range OFF: object outside the scanning range | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC | |
| Ripple | 10 % | |
| No-load supply current | max. 25 mA | |
| Input | ||
| Control input | - When the input is open: Sensor operates - the output is reset on a positive edge - the output is set at high level when an object is located in the detection range - there is no sensor function at low level, the output signal is stored until the next positive edge | |
| Output | ||
| Signal output | 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 100 mA | |
| Voltage drop | ≤ 2.5 V DC | |
| Switching frequency | 250 Hz | |
| Response time | 2 ms | |
| Conformity | ||
| Product standard | EN 60947-5-2 | |
| Approvals and certificates | ||
| UL approval | cULus Listed 57M3 (Only in association with UL Class 2 power supply; Type 1 enclosure) | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | 0 ... 70 °C (32 ... 158 °F) | |
| Storage temperature | -40 ... 75 °C (-40 ... 167 °F) | |
| Mechanical specifications | ||
| Housing width | 31 mm | |
| Housing height | 56.5 mm | |
| Housing depth | 13.6 mm | |
| Degree of protection | IP67 | |
| Connection | M8 x 1 connector, 4-pin | |
| Material | ||
| Housing | Aluminum , Delta-Seal coated | |
| Optical face | glass pane | |
| Connector | metal | |
| Mass | 50 g | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270903 |
| ECLASS 12.0 | 27270903 |
| ECLASS 11.0 | 27270903 |
| ECLASS 10.0.1 | 27270903 |
| ECLASS 9.0 | 27270903 |
| ECLASS 8.0 | 27270903 |
| ECLASS 5.1 | 27270903 |
| ETIM 9.0 | EC001821 |
| ETIM 8.0 | EC001821 |
| ETIM 7.0 | EC001821 |
| ETIM 6.0 | EC001821 |
| ETIM 5.0 | EC001821 |
| UNSPSC 12.1 | 39121528 |
Check out any spare parts and components from the Pepperl+Fuchs catalog!
Do you want to order a Background suppression sensor MLV41-8-HV-60-IR-5360 with code: MLV41-8-HV-60-IR-5360?
Leave your request on our website for immediate assistance!
