Ultrasonic sensor UC10000-F260-IE9R2
Brand: Pepperl+Fuchs
Code: UC10000-F260-IE9R2
Single head system, Large sensing range, Adjustable Bracket, Programmable by means of Interface (see accessories) and SONPROG, Series: F260, Rated operating voltage: 24 V DC, Operating voltage: 15 ... 30 V (including ripple)
In supply voltage interval 15 ... 20 V sensitivity reduced to 20% ... 0%, Output type: 2 switch outputs PNP, NC, Output type: 1 current output 4 ... 20 mA rising ramp , UL approval: cULus Listed, General Purpose
Datasheet excerpt: Technical data of UC10000-F260-IE9R2
| Product Description |
|---|
| Single head system |
| General specifications | ||
|---|---|---|
| Sensing range | 800 ... 10000 mm | |
| Adjustment range | 800 ... 10000 mm | |
| Dead band | 0 ... 800 mm | |
| Standard target plate | 100 mm x 100 mm | |
| Transducer frequency | approx. 60 kHz | |
| Nominal ratings | ||
| Time delay before availability | 280 ms | |
| Limit data | ||
| Permissible cable length | max. 300 m | |
| Indicators/operating means | ||
| LED yellow | solid: switching state switch output flashing: misadjustment | |
| Electrical specifications | ||
| Rated operating voltage | 24 V DC | |
| Operating voltage | 15 ... 30 V (including ripple) In supply voltage interval 15 ... 20 V sensitivity reduced to 20% ... 0% | |
| Ripple | ≤ 10 % | |
| No-load supply current | ≤ 75 mA | |
| Input/Output | ||
| Input/output type | 1 synchronization connection, bidirectional | |
| 0 Level | ≤ 3 V | |
| 1 Level | 15 ... 30 V | |
| Input impedance | typ. 0.9 kΩ | |
| Number of sensors | max. 10 | |
| Switching output | ||
| Output type | 2 switch outputs PNP, NC | |
| Repeat accuracy | ± 15 mm | |
| Operating current | 150 mA , short-circuit/overload protected | |
| Voltage drop | ≤ 3 V | |
| Switch-on delay | 800 ms | |
| Analog output | ||
| Output type | 1 current output 4 ... 20 mA rising ramp | |
| Default setting | 800 ... 10000 mm | |
| Linearity error | ≤ 1.5 % | |
| Load resistor | ≤ 300 Ω | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 EN 60947-5-7:2003 IEC 60947-5-7:2003 | |
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Shock resistance | 30 g , 11 ms period | |
| Vibration resistance | 10 ... 55 Hz , Amplitude ± 1 mm | |
| Mechanical specifications | ||
| Connection type | screw terminals , PG 13.5 cable gland | |
| Housing diameter | 160 mm | |
| Degree of protection | IP65 | |
| Material | ||
| Housing | UP 1225 SF/R8 | |
| Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam | |
| Installation position | any position | |
| Mass | 1800 g | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27272803 |
| ECLASS 12.0 | 27272803 |
| ECLASS 11.0 | 27272803 |
| ECLASS 10.0.1 | 27272803 |
| ECLASS 9.0 | 27272803 |
| ECLASS 8.0 | 27272803 |
| ECLASS 5.1 | 27272803 |
| ETIM 9.0 | EC001849 |
| ETIM 8.0 | EC001849 |
| ETIM 7.0 | EC001849 |
| ETIM 6.0 | EC001849 |
| ETIM 5.0 | EC001849 |
| UNSPSC 12.1 | 41111960 |
Check out any spare parts and components from the Pepperl+Fuchs catalog!
Do you want to order a Ultrasonic sensor UC10000-F260-IE9R2 with code: UC10000-F260-IE9R2?
Leave your request on our website for immediate assistance!
