Ultrasonic sensor UC3500-30GM70-2E2R2-V15
Brand: Pepperl+Fuchs
Code: UC3500-30GM70-2E2R2-V15
Ultrasonic direct detection sensor, 2 switch outputs, Synchronization options, Temperature compensation, Series: -30GM, Rated operating voltage: 24 V DC, Operating voltage: 12 ... 30 V DC (including ripple), Interface type: Infrared, Output type: 2 switch outputs PNP, NO ( NC contact programmable ), UL approval: cULus Listed, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V, Connection type: Connector plug M12 x 1 , 5-pin, Housing: brass, nickel-plated
Datasheet excerpt: Technical data of UC3500-30GM70-2E2R2-V15
| Product Description |
|---|
| Ultrasonic direct detection sensor |
| General specifications | ||
|---|---|---|
| Sensing range | 200 ... 3500 mm | |
| Adjustment range | 300 ... 3500 mm | |
| Dead band | 0 ... 200 mm | |
| Standard target plate | 100 mm x 100 mm | |
| Transducer frequency | approx. 120 kHz | |
| Response delay | ≤ 150 ms | |
| Nominal ratings | ||
| Temperature drift | ≤ ± 1.5 % of full-scale value | |
| Time delay before availability | ≤ 175 ms | |
| Limit data | ||
| Permissible cable length | max. 300 m | |
| Indicators/operating means | ||
| LED yellow | solid Switching state switch output 1 | |
| LED green/yellow | yellow: switching state switch output 2 green: Teach-In | |
| Potentiometer | Switching output 1 and Switching output 2 adjustable | |
| Electrical specifications | ||
| Rated operating voltage | 24 V DC | |
| Operating voltage | 12 ... 30 V DC (including ripple) | |
| Ripple | ≤ 10 % | |
| No-load supply current | ≤ 50 mA | |
| Interface | ||
| Interface type | Infrared | |
| Mode | point-to-point connection | |
| Input/Output | ||
| Input/output type | 1 synchronization connection, bidirectional ( Factory setting: synchronized mode ) / Teach-In input | |
| 0 Level | ≤ 3 V | |
| 1 Level | ≥ 15 V | |
| Input impedance | typ. 900 Ω | |
| Number of sensors | max. 10 | |
| Switching output | ||
| Output type | 2 switch outputs PNP, NO ( NC contact programmable ) | |
| Default setting | 300 ... 3500 mm ( adjustable via potentiometer ) | |
| Repeat accuracy | ± 5 mm | |
| Operating current | per 150 mA , short-circuit/overload protected | |
| Switching frequency | ≤ 2 Hz | |
| Switching hysteresis | 35 mm ( programmable ) | |
| Voltage drop | ≤ 3 V | |
| Off-state current | ≤ 10 µA | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 | |
| Approvals and certificates | ||
| UL approval | cULus Listed, Class 2 Power Source | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Shock resistance | 30 g , 11 ms period | |
| Vibration resistance | 10 ... 55 Hz , Amplitude ± 1 mm | |
| Mechanical specifications | ||
| Connection type | Connector plug M12 x 1 , 5-pin | |
| Housing diameter | 30 mm | |
| Degree of protection | IP65 | |
| Material | ||
| Housing | brass, nickel-plated | |
| Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam | |
| Installation position | any position | |
| Mass | 140 g | |
| Construction type | Cylindrical | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27272803 |
| ECLASS 12.0 | 27272803 |
| ECLASS 11.0 | 27272803 |
| ECLASS 10.0.1 | 27272803 |
| ECLASS 9.0 | 27272803 |
| ECLASS 8.0 | 27272803 |
| ECLASS 5.1 | 27272803 |
| ETIM 9.0 | EC001849 |
| ETIM 8.0 | EC001849 |
| ETIM 7.0 | EC001849 |
| ETIM 6.0 | EC001849 |
| ETIM 5.0 | EC001849 |
| UNSPSC 12.1 | 41111960 |
Check out any spare parts and components from the Pepperl+Fuchs catalog!
Do you want to order a Ultrasonic sensor UC3500-30GM70-2E2R2-V15 with code: UC3500-30GM70-2E2R2-V15?
Leave your request on our website for immediate assistance!
