Ultrasonic sensor UMB800-18H40-E4-2M
Brand: Pepperl+Fuchs
Code: UMB800-18H40-E4-2M
Single head system, Front of transducer and housing manufactured entirely from stainless steel, Degree of protection IP68 / IP69K, Short version: 55 mm, Series: -18H, Operating voltage: 10 ... 30 V DC, Output type: 1 switching output E4, NPN, NO/NC, programmable, CCC approval: CCC approval / marking not required for products rated ≤36 V, Connection type: cable PUR , 2 m , Polyether based, Housing: Stainless steel 1.4404 / AISI 316L
Datasheet excerpt: Technical data of UMB800-18H40-E4-2M
| Product Description |
|---|
| Single head system |
| General specifications | ||
|---|---|---|
| Sensing range | 70 ... 800 mm | |
| Adjustment range | 90 ... 800 mm | |
| Dead band | 0 ... 70 mm | |
| Standard target plate | 100 mm x 100 mm | |
| Transducer frequency | approx. 170 kHz | |
| Response delay | approx. 100 ms | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC | |
| No-load supply current | ≤ 15 mA | |
| Input | ||
| Input type | 1 program input operating distance 1: -UB ... +1 V, operating distance 2: +6 V ... +UB input impedance: > 4,7 kΩ program pulse: ≥ 1 s | |
| Output | ||
| Output type | 1 switching output E4, NPN, NO/NC, programmable | |
| Rated operating current | 200 mA , short-circuit/overload protected | |
| Voltage drop | ≤ 3 V | |
| Repeat accuracy | ± 0.5 % of full-scale value | |
| Switching frequency | ≤ 4 Hz | |
| Range hysteresis | 1 % of the set operating distance | |
| Temperature influence | ± 1.5 % of full-scale value | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 | |
| Approvals and certificates | ||
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 85 °C (-13 ... 185 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Connection type | cable PUR , 2 m , Polyether based | |
| Core cross section | 4 x 0.19 mm2 | |
| Housing diameter | 18 mm | |
| Degree of protection | IP68 / IP69K | |
| Material | ||
| Housing | Stainless steel 1.4404 / AISI 316L | |
| Transducer | Stainless steel 1.4435 / AISI 316L | |
| Seal | Cable seal : TPU , Elastollan 1185 A10 | |
| Mass | 90 g | |
| Factory settings | ||
| Output | Switch point A1: 90 mm Switch point A2: 800 mm Output mode: Window mode Output logic: normally open | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27272803 |
| ECLASS 12.0 | 27272803 |
| ECLASS 11.0 | 27272803 |
| ECLASS 10.0.1 | 27272803 |
| ECLASS 9.0 | 27272803 |
| ECLASS 8.0 | 27272803 |
| ECLASS 5.1 | 27272803 |
| ETIM 9.0 | EC001849 |
| ETIM 8.0 | EC001849 |
| ETIM 7.0 | EC001849 |
| ETIM 6.0 | EC001849 |
| ETIM 5.0 | EC001849 |
| UNSPSC 12.1 | 41111960 |
Check out any spare parts and components from the Pepperl+Fuchs catalog!
Do you want to order a Ultrasonic sensor UMB800-18H40-E4-2M with code: UMB800-18H40-E4-2M?
Leave your request on our website for immediate assistance!
