AS-Interface printed circuit board VBA-2E1A-CB-N/E2-S
Brand: Pepperl+Fuchs
Code: VBA-2E1A-CB-N/E2-S
Printed circuit board module
2 NAMUR inputs and 1 electronic output
Datasheet excerpt: Technical data of VBA-2E1A-CB-N/E2-S
Product Description |
---|
Printed circuit board module 2 NAMUR inputs and 1 electronic output |
General specifications | ||
---|---|---|
Node type | A/B node | |
Indicators/operating means | ||
LED PWR/FAULT | dual LED green/red LED 1 green: AS-Interface voltage OK LED 1 red: communication error or address is 0 LED 1 green/red flashing: short-circuit or lead breakage | |
LED IN | 2 LEDs yellow; LED 2 yellow illuminated: switching state IN1 ON, otherwise OFF LED 3 yellow illuminated: switching state IN2 ON, otherwise OFF | |
Electrical specifications | ||
Rated operating voltage | 26.5 ... 31.6 V from AS-Interface | |
Rated operating current | ≤ 40 mA (without sensors) / max. 150 mA | |
Protection class | III | |
Input | ||
Number/Type | 2 inputs for NAMUR Sensors | |
Supply | from AS-Interface | |
Voltage | 8 V | |
Input current | ≤ 8 mA (limited internally) | |
Switching point | OFF ≤ 1.2 mA ON ≥ 2.1 mA according to DIN EN 60947-5-6 | |
Output | ||
Number/Type | 1 electronic output, switched low, overload and short-circuit proof, lead breakage and short-circuit monitored | |
Supply | from AS-Interface | |
Voltage | 21 ... 31 V | |
Current | max. 100 mA | |
Standard conformity | ||
Degree of protection | EN 60529:2000 | |
AS-Interface | EN 62026-2:2013 | |
Programming instructions | ||
Profile | S-D.A.E | |
IO code | D | |
ID code | A | |
ID1 code | 7 | |
ID2 code | E | |
Data bits (function via AS-Interface) | ||
D0 | ||
D1 | ||
D2 | ||
D3 | ||
Parameter bits (programmable via AS-i) | function | |
P0 | not used | |
P1 | not used | |
P2 | not used | |
P3 | not used | |
Ambient conditions | ||
Ambient temperature | -25 ... 60 °C (-13 ... 140 °F) | |
Storage temperature | -25 ... 85 °C (-13 ... 185 °F) | |
Mechanical specifications | ||
Degree of protection | IP20 (completely fitted) according to EN 60529 | |
Connection | screw terminal strip max. conductor cross section 1 mm2 | |
Mass | 20 g |
Classifications
System | Classcode |
---|---|
ECLASS 13.0 | 27242604 |
ECLASS 12.0 | 27242604 |
ECLASS 11.0 | 27242604 |
ECLASS 10.0.1 | 27242604 |
ECLASS 9.0 | 27242604 |
ECLASS 8.0 | 27242604 |
ECLASS 5.1 | 27242604 |
ETIM 9.0 | EC001599 |
ETIM 8.0 | EC001599 |
ETIM 7.0 | EC001599 |
ETIM 6.0 | EC001599 |
ETIM 5.0 | EC001599 |
UNSPSC 12.1 | 39121535 |
Check out any spare parts and components from the Pepperl+Fuchs catalog!
Do you want to order a AS-Interface printed circuit board VBA-2E1A-CB-N/E2-S with code: VBA-2E1A-CB-N/E2-S?
Leave your request on our website for immediate assistance!