Vision Sensor VOS5000-F227-C-S
Brand: Pepperl+Fuchs
Code: VOS5000-F227-C-S
Vision sensor for advanced object detection;
Resolution: 2560 x 2048 pixels;
Light source: external illumination;
Lens: C-mount connection
Datasheet excerpt: Technical data of VOS5000-F227-C-S
| Product Description |
|---|
| Vision sensor for advanced object detection; Resolution: 2560 x 2048 pixels; Light source: external illumination; Lens: C-mount connection |
| General specifications | ||
|---|---|---|
| Light source | External lighting | |
| Picture detail | dependant of operating distance (see manual) | |
| Trigger mode | Free-running or triggered externally | |
| Depth of focus | ± 5 % of the operating distance | |
| Resolution | 2560 x 2048 pixels | |
| Image sensor | 1" CMOS monochrom Global Shutter 5 µm pixel size | |
| Parameterization/software | ||
| Parameter assignment | Parameterization via PC user interface VCT Tool | |
| Evaluation procedure | ||
| Positioning and Guidance | Based on Parts or product marks, up to four Locators to detect X,Y shift and rotation | |
| Identification and Verification | OCR, 1-D and 2-D codes | |
| Detection & Pattern Matching | Pixel-, contour- or edge count | |
| Measuring | Distance, angle, circle size (after calibration) | |
| Indicators/operating means | ||
| LED 1 | Steady blue: sensor started, not set up Steady green: job loaded, ready for execution Flashing green: job loaded and being executed, capture in progress Steady red: sensor fault | |
| LED 2 | Flashing blue: starting (duration approx. 20 seconds) Steady green: measurement successful (Pass) Steady blue: measurement borderline (Recycle) Steady red: measurement unsuccessful (Fail) | |
| LED 3 | Steady blue: warm reset or restart Steady red/green/yellow: network activity | |
| Electrical specifications | ||
| Operating voltage | 21 ... 30 V DC | |
| No-load supply current | 300 mA | |
| Interface 1 | ||
| Interface type | Ethernet | |
| Protocol | PROFINET IO TCP/IP EtherNet/IP | |
| Transfer rate | 1 GBit/s | |
| Interface 2 | ||
| Interface type | RS-232 , serial | |
| Transfer rate | 115.2 kBit/s | |
| Input | ||
| Input type | optically decoupled Inputs | |
| Input voltage | Logic low (OFF): 0 ... 3 V Logic high (ON): 11 ... 30 V Switching threshold: 12 V | |
| Control input | Image capture trigger + 2 general purpose inputs 2 inputs can be used for job switching | |
| Input current | 8 mA ( typical ) | |
| Internal protection circuit | 3 kΩ / 4000 V ( rms ) | |
| Switching delay | Switch-on time (ON): 20 µs Switch-off time (OFF): 10 µs Image capture trigger: 62 µs (until image capture is triggered) | |
| Output | ||
| Output type | 3 general purpose outputs , freely programmable , optically decoupled | |
| Switching voltage | max. 30 V | |
| Switching current | max. 200 mA each output | |
| Switching delay | Switch-on time (ON): 400 µs Switch-off time (OFF): 80 µs | |
| Standard conformity | ||
| Emitted interference | EN 61000-6-4:2007+A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Approvals and certificates | ||
| Approvals | CE | |
| Ambient conditions | ||
| Ambient temperature | 0 ... 50 °C (32 ... 122 °F) | |
| Storage temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Mechanical specifications | ||
| Housing length | 83 mm | |
| Housing width | 66 mm | |
| Housing height | 48 mm | |
| Degree of protection | IP67 (with mounted lens protection cover) | |
| Connection | 5-pin M12 socket ; 8-pin M12 socket X-coded ; 12-pin M12 socket | |
| Material | ||
| Housing | anodized aluminum | |
| Installation | Mounting bracket | |
| Mass | 450 g | |
| Objective connection | C-mount connection for external lens with different focal lengths | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27310101 |
| ECLASS 12.0 | 27310101 |
| ECLASS 11.0 | 27310101 |
| ECLASS 10.0.1 | 27310101 |
| ECLASS 9.0 | 27310101 |
| ECLASS 8.0 | 27310101 |
| ECLASS 5.1 | 27310101 |
| ETIM 9.0 | EC002999 |
| ETIM 8.0 | EC002999 |
| ETIM 7.0 | EC002999 |
| ETIM 6.0 | EC002999 |
| ETIM 5.0 | EC002999 |
| UNSPSC 12.1 | 43211711 |
Check out any spare parts and components from the Pepperl+Fuchs catalog!
Do you want to order a Vision Sensor VOS5000-F227-C-S with code: VOS5000-F227-C-S?
Leave your request on our website for immediate assistance!
