WCS interface module WCS-ECG110

Code: WCS-ECG110

WCS interface module with EtherCAT interface, Up to 4 read heads can be connected, DIN rail mounting, Integrated switch, EtherCAT interface

Datasheet excerpt: Technical data of WCS-ECG110

Product Description
WCS interface module with EtherCAT interface

General specifications
Installation		DIN rail mounting
Functional safety related parameters
MTTF_d		180 a
Mission Time (T_M)		10 a
Diagnostic Coverage (DC)		0 %
Electrical specifications
Operating voltage		10 ... 30 V DC
Power consumption		≤ 3.6 W (without read heads)
Interface 1
Connection of		control system
Interface type		Ethernet; 100 BASE-TX
Protocol		EtherCAT®
Transfer rate		100 MBit/s
Data output format		binary code
Interface 2
Connection of		control system
Interface type		Ethernet; 100 BASE-TX
Protocol		EtherCAT®
Transfer rate		100 MBit/s
Data output format		binary code
Interface 3
Connection of		WCS read heads
Connectable read heads		WCS...-LS121 , WCS...-LS221
Interface type		RS-485
Protocol		half duplex
Transfer rate		62.5 kBit/s
RS485 termination resistor		switchable
Refresh cycle of read head		1 ms
Standard conformity
Emitted interference		EN 55011, cl. A: 2007
Noise immunity		EN 61000-6-2:2005
Approvals and certificates
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Operating temperature		-25 ... 85 °C (-13 ... 185 °F) , no moisture condensation
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Relative humidity		≤ 80 %
Mechanical specifications
Connection type		Interface 1 & 2: RJ-45 socket, 8-pin Interface 3: terminal connection ≤ 2.5 mm² Interface 4: Terminal connection, 2-pin
Housing width		23 mm
Housing height		100 mm (without plug-in screw connector) 111 mm (incl. plug-in screw connector)
Housing depth		115 mm
Degree of protection		IP20
Material		plastic
Installation position		any position
Mass		approx. 130 g