WCS interface module WCS-PNG410
Brand: Pepperl+Fuchs
Code: WCS-PNG410
Up to 4 read heads can be connected, DIN rail mounting, Integrated switch, PROFINET interface, Measuring length max. 629 m
Datasheet excerpt: Technical data of WCS-PNG410
| General specifications | ||
|---|---|---|
| Installation | DIN rail mounting | |
| Functional safety related parameters | ||
| MTTFd | 180 a | |
| Mission Time (TM) | 10 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC | |
| Power consumption | ≤ 3.6 W (without read heads) | |
| Interface 1 | ||
| Connection of | control system | |
| Interface type | Ethernet; 100 BASE-TX | |
| Protocol | PROFINET IO | |
| Transfer rate | 100 MBit/s | |
| Data output format | binary code | |
| Interface 2 | ||
| Connection of | control system | |
| Interface type | Ethernet; 100 BASE-TX | |
| Protocol | PROFINET IO | |
| Transfer rate | 100 MBit/s | |
| Data output format | binary code | |
| Interface 3 | ||
| Connection of | WCS read heads | |
| Connectable read heads | WCS...-LS121 , WCS...-LS221 , WCS3B-LS1/2**ES with option ES (Extended Protocol up to 628 m) | |
| Interface type | RS-485 | |
| Protocol | half duplex | |
| Transfer rate | 62.5 kBit/s | |
| RS485 termination resistor | switchable | |
| Refresh cycle of read head | 1 ms / 10 ms (with extended WCS read head) | |
| Standard conformity | ||
| Emitted interference | EN 55011, cl. A: 2007 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Approvals and certificates | ||
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Operating temperature | -25 ... 85 °C (-13 ... 185 °F) , no moisture condensation | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Relative humidity | ≤ 80 % | |
| Mechanical specifications | ||
| Connection type | Interface 1 & 2: RJ-45 socket, 8-pin Interface 3: terminal connection ≤ 2.5 mm2 Interface 4: Terminal connection, 2-pin | |
| Housing width | 23 mm | |
| Housing height | 100 mm (without plug-in screw connector) 111 mm (incl. plug-in screw connector) | |
| Housing depth | 115 mm | |
| Degree of protection | IP20 | |
| Material | plastic | |
| Installation position | any position | |
| Mass | approx. 150 g | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270991 |
| ECLASS 12.0 | 27270991 |
| ECLASS 11.0 | 27270791 |
| ECLASS 10.0.1 | 27270791 |
| ECLASS 9.0 | 27270791 |
| ECLASS 8.0 | 27270791 |
| ECLASS 5.1 | 27270791 |
| ETIM 9.0 | EC001852 |
| ETIM 8.0 | EC001852 |
| ETIM 7.0 | EC001852 |
| ETIM 6.0 | EC001852 |
| ETIM 5.0 | EC001852 |
| UNSPSC 12.1 | 41111945 |
Check out any spare parts and components from the Pepperl+Fuchs catalog!
Do you want to order a WCS interface module WCS-PNG410 with code: WCS-PNG410?
Leave your request on our website for immediate assistance!
